Tyre Puncture
u
Removing Wheels
82
Tr
ou
bles
hoo
ting
Installation
1.
Attach the side collars to the wheel.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
left side, through the wheel hub and
right fork leg.
3.
Tighten the front axle nut.
4.
Install the brake caliper and tighten the
mounting bolts.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the brake caliper.
5.
Lower the front wheel on the ground.
6.
Apply the brake lever and pump the fork
several times.
7.
Tighten the axle pinch bolt.
8.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque:
59 N·m (6.0 kgf·m, 44 lbf·ft).
Torque:
30 N·m (3.1 kgf·m, 22 lbf·ft).
NOTICE
When installing the brake caliper into position on the
fork leg, carefully fit the brake disc between the pads
to avoid scratching them.
Torque:
22 N·m (2.2 kgf·m, 16 lbf·ft).
15 CB300FA (U)-32K33K000.book 82 ページ ２０１４年１０月９日 木曜日 午後１時４分
