Maintenance Fundamentals
53
continued
Maintenance
❙
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use dry
cloth with chain cleaner designed specifically
for O-ring chains, or neutral detergent. Use a
soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant. If not available, use
SAE 80 or 90 gear oil.
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such as
petrol and benzene, abrasive cleaner, chain
cleaner or lubricant NOT designed specifically
for O-ring chains as these can damage the
rubber O-ring seals.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.
Use only genuine HONDA PRE-MIX COOLANT
without diluting with water.
Genuine HONDA PRE-MIX COOLANT is
excellent at preventing corrosion and
overheating.
The coolant should be inspected and replaced
properly by following the maintenance
schedule.
2
P. 44
Recommended lubricant:
Drive chain lubricant designed
specifically for O-ring chains.
Recommended Coolant
12 NC700D (NM-2)(TH)-32MGS8000.book 53 ページ ２０１２年４月１８日 水曜日 午後９時３分
