Tyre Puncture
u
Removing Wheels
99
Tr
ou
bles
hoo
ting
3.
Adjust the drive chain.
2
P. 79
4.
Install and tighten the rear axle nut.
5.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
6.
After installing the wheel, apply the rear
brake lever several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
7.
Install the parking brake caliper and
tighten the mounting bolts.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque:
98 N·m (10.0 kgf·m, 72 lbf·ft).
Torque:
21 N·m (2.1 kgf·m, 15 lbf·ft).
Torque:
31 N·m (3.2 kgf·m, 23 lbf·ft).
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
12 NC700D (NM-2)(TH)-32MGS8000.book 99 ページ ２０１２年４月１８日 水曜日 午後９時３分
