Driving to Your Destination
Navigation System
53
Changing the Routing Method
The system lets you select the way you
want to drive to your destination. Select
Route Pref.
on the
Calculate route
to
screen by rotating the
Interface
Dial knob
.
• You can choose
MAX
or
MIN
for
three settings:
Use Freeways
,
Use
Toll Roads,
and
Use Ferries
. The
route calculations for the current
selection will be displayed in the
upper right-hand corner of the screen.
The generated route may not be the
route you would choose. For safety
reasons, the system generally applies
the following rules to your route:
• Shortcuts through residential areas
are avoided.
• Right turns are favored over left turns
or U-turns.
• Restricted turns (turns that cannot be
made during or at certain times of the
day) are not used.
Viewing the Routes
If you select
View Routes
on the
Calculate route to
screen, you can
view three possible routes to your
destination. You can also use the
Interface Dial
to verify the areas
peripheral to the map. If you select
View Routes
, the display changes to:
These different routes are shown and
calculated based on the setup options in
Route Preference
.
You can select one of the three routes
(1-3) by rotating the
Interface Dial
knob
. The system will calculate the
selected route and display the
map
screen.
