To Play a PC Card
You operate the PC card player with
the same controls used for the radio
and the disc player. To load or play a
card, the ignition switch must be in
the ACCESSORY (I) or ON (II)
position.
The PC card player reads and plays
cards in MP3 or WMA formats.
Depending on the format, the screen
will indicate
‘‘
MP3
’’
or
‘‘
WMA
’’
when
a card is playing. The card limit of
the player is 99 folders and 999
tracks. If the card has a complex
structure, it takes some time for the
system to begin playing it.
Based on PCMCIA 2.1/JEIDA 4.2,
the recommended PC cards for the
PC card reader are:
CompactFlash
Flash ATA
SD memory card
Always use the recommended
memory card with the appropriate
adapter (if an adapter is needed).
Some memory cards will not work in
this unit.
NOTE:
●
When you insert a PC card into the
slot, make sure you put it in
straight. If you cannot insert it,
remove it, and insert again.
●
Do not keep PC cards in the
vehicle. Direct sunlight and high
heat will damage them.
●
To avoid damaging the card
reader, do not insert hard disc
drive cards into the PC card slot.
●
You cannot close the screen (move
it to the upright position) until the
PC card is inserted all the way into
its slot or removed.
●
Never insert foreign objects into
the PC card slot.
The specifications for compatible
MP3 files are:
–
Sampling frequency:
32/44.1/48 kHz (MPEG1)
16/22.05/24 kHz (MPEG2)
–
Bitrate:
32/40/48/56/64/80/96/112/128/
160/192/224/256/320 kbps
(MPEG1)
8/16/24/32/40/48/56/64/80/96/
112/128/160 kbps (MPEG2)
–
Compatible with variable bitrate
and multi-session
–
Maximum layers
(including ROOT): 8 layers
Playing a PC Card (Models with navigation system)
150
