manualshive.com logo in svg

Honda 2009 AQUATRAX F-15, Руководство пользователя, Страница: 71 / 296

Поделиться
Скачать
Honda 2009 AQUATRAX F-15 Скачать руководство пользователя страница 71

Important Safety Information

GPScape System

The GPScape System is designed to provide
information to help you reach selected
destinations. While this system provides the
direction and distance to a destination, you
must use your own observation and good
judgement in deciding how to safely reach
the destination.

Also, be aware that the system can distract
your attention from operating your PWC if
you focus too much on the display or operate
the system’s controls while riding. Do not
look at the display unless you decide you can
do so safely.

63

Using the GPScape System while
you are riding can take your
attention away from the water
surface, other watercraft and
possible hazards, causing a crash
in which you could be seriously
injured or killed.

• Do not look at the display for more

than a second or so at a time
while riding.

• Stop your PWC if you need more

time to look at the display or
operate the system controls.

Содержание 2009 AQUATRAX F-15









































































































































































































































































































Отзывы:

Нет отзывов