Honda 2007 CRF250R, Руководство пользователя

Страница: 47 / 165

42
Servicing Your Honda
Cooling System Inspection
1. Check the cooling system for leaks (see the
Honda Service Manual for troubleshooting of
leaks).
2. Check the water hoses (1) for cracks,
deterioration, and hose clamp for looseness.
3. Check the radiator mount for looseness.
4. Make sure the overflow tube (2) is connected
and not clogged.
5. Check the radiator fins for clogging.
6. Check the water leakage check hole (3) below
the water pump cover (4) for leakage. Make
sure the hole remains open. If water leaks
through the check hole, the water seal is
damaged. If oil leaks through the check hole,
the oil seal is damaged. See the Honda
Service Manual or consult your Honda dealer
for replacing the water seal or the oil seal.
Both seals should be replaced at the same
time.
Coolant Replacement
Refer to Safety Precautions on page 19.
Coolant should be replaced by your Honda
dealer, unless you have the proper tools and
service data and are mechanically qualified.
Refer to the Honda Service Manual
(page 152).
To properly dispose of drained coolant, refer to
You & the Environment, page 136.
Improper disposal of drained fluids is harmful to
the environment.
NOTICE
Coolant
WARNING
(2)
(1)
(4)
(3)
(1) water hoses
(2) overflow tube
(3) water leakage check hole
(4) water pump cover
Removing the radiator cap while the
engine is hot can cause the coolant to
spray out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
024-054.qxd 06.6.15 14:31 ページ42