Honda 2007 Accord Coupe, Руководство пользователя

Страница: 238 / 320

Reinstall the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within
5
seconds. If it does not, turn off the
engine, and check your work.
Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
Turn off the engine and let it sit
for several minutes, then check
the oil level on the dipstick. If
necessary, add more oil.
Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten the drain bolt to:
( 4 -cylinder models)
( 6 -cylinder models)
Refill the engine with the
recommended oil.
Engine oil change capacity
(including filter):
( 4 -cylinder models)
Install a new oil filter according to
the instructions that come with it.
Make sure to clean off any dirt
and dust on the connecting
surface of a new oil filter. 4 .
5 .
6 .
7 .
8 .
9 .
Changing the Oil and Filter
Ma
int
e
na
nce
235
OIL FILTER
33 lbf·ft ( 44 N·m , 4.5 kgf·m)
29 lbf·ft ( 39 N·m , 4.0 kgf·m)
4.4 US qt (4.2 )
4.5 US qt (4.3 )
Improper disposal of engine oil can be
harmf ul to the environment. If you
change your own oil, please dispose of
the used oil properly. Put it in a sealed
container and take it to a recycling
center. Do not discard it in a trash bin
or dump it on the ground.
V6 models
(V6 models)
Main Menu Table of Contents
s t
Main Menu
s t
Table of Contents