−
▲
▼
−
−
▲
▼
−
To rewind the tape,
push the Preset 1 (REW) side of the
preset bar or the upper side (
) of
the CH DISC bar. You will see REW
in the display. To fast forward the
tape, push the Preset 2 (FF) side of
the preset bar. You will see FF dis-
played. Press the Preset 1, 2, or 3
side of the bars or the lower side
(
) of the CH DISC bar to take the
system out of rewind or fast forward.
Press the
side to find
the beginning of the current song or
passage. Press the
side to find
the beginning of the next song or
passage. When the system reaches
the beginning of a song or passage, it
begins to play it.
To rewind the tape
push the upper side (
) of the CH
DISC bar. To fast forward the tape,
push the lower side (
) of the CH
DISC bar. Press either side of the
PROG icon in the audio display to
take the system out of rewind or fast
forward.
Press the RPT button
or icon to continuously play a song or
passage. You will see RPT displayed.
The track will repeat until you press
the RPT button or icon again.
The skip and repeat
functions use silent periods on the
tape to find the end of a song or
passage. These features may not
work if there is almost no gap
between selections, a high noise
level, or a silent period in the middle
of a selection.
If you see the error message
‘‘
’’ on the display, press the
tape eject button to remove the tape
from the unit. Make sure the tape is
not damaged. If the tape will not
eject or the error message stays on
after the tape ejects, take your
vehicle to your dealer.
EX-L and EX-V6 with Navigation System
Tape Search Functions
FF/REW
SKIP
FF/REW
REPEAT
Playing a Tape (U.S. Vehicles)
Fe
a
tu
re
s
133
NOTE:
０６／０５／１６ １４：１４：５４ ３１ＳＤＡ６４０ ０１３８
