08V31-TV0-6000-96
34 / 36
Reinstalling the All Removed Parts
123. Reinstall all removed parts.
124. Check that the electric accessories and systems
operate properly.
125. Press and hold the audio power button for two
seconds, or enter anti-theft code for the audio/
navigation system.
126. Reset the memory of each equipment and restore
the positions of those control knobs.
NOTICE
• When you connect the connector, be sure to
disconnect the negative cable from the battery.
• Be extremely careful not to damage the vehicle
parts, pinch the harnesses.
• Make sure to secure the retaining tabs and clips
properly to avoid separation.
Q060703AM
Q060704AM
Aiming Adjustment
The illustration shows information on the left side of the
vehicle. Repeat the same procedure for the right side of
the vehicle.
127. Check before aiming adjustment.
• Vehicle is parked on a level surface.
• Make sure the tire pressures are correct.
• A person weighing approx. 75 kg (165 lbs) is sitting in
the driver’s seat.
• Make sure the rear cargo area is empty except for a
spare tire or flat tire repair kit and the maintenance
tools.
128. Position the vehicle opposite to the wall or screen.
129. Measure the center of the fog light bulb from the
floor and mark on the wall or screen.
130. Turn on the fog light.
131. Confirm the height of the cut off line according to the
distance to the wall or screen.
NOTICE
• Do not cover the outer lens for long period of time
when the fog light is turned on.
972039CS
Wall or screen
3 m (9.8 ft)
1 m (3.3 ft)
2 m (6.6 ft)
-4.5
cm
(-1.8
in.)
-3.0
cm
(-1.2
in.)
-1.5 cm
(-0.6 in.)
Borderline of lighting
(Cut off line)
Center of the
fog light bulb
<A>
<B>
Wall or screen
<A>
<B>