Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Test the lights to make sure the
new bulb is working.
Install the light assembly cover.
Make sure it locks in place.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Remove the socket by turning it
one-quarter turn counterclockwise.
Determine which of the four bulbs
is burned out: brake/taillight, turn
signal light, side marker light, or
back-up light.
2.
3.
4.
5.
6.
7.
Lights
178