Slide the lens to the right until the
left side of the lens pops out of the
body. Pull out the light assembly.
Remove the lens from the socket
by pulling the lens while squeezing
the tabs on both sides of the
socket.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Turn on the parking lights and
check that the new bulb is
working.
Put the lens back on the bulb
holder and push it until it latches.
Slide the right side of the light
assembly into the hole. Push on
the left side to latch the assembly
into place.
1.
3.
2.
6.
4.
5.
Lights
Replacing a Rear License Plate
Bulb
152
BULB
SOCKET
04/07/16 13:21:36 31S5T630 0155