2003 ST1300 / ST1300A
4
©2003 American Honda Motor Co., Inc. - All Rights Reserved
5. Remove the motorcycle from the
crate base.
Install lifting slings on the engine guards and grab rail
as shown.
Use a spreader board, if necessary, to prevent the
slings from damaging the motorcycle.
Lift the slings just enough to remove the slack.
Remove the shipping bolts and washers from the forks;
discard the bolts and washers.
Remove the shipping braces, nuts, and protective
covering from the foot pegs (both sides).
Lift the motorcycle free from the crate base and
remove the base.
On a firm, level surface, lower the centerstand and
lower the motorcycle until it is resting on its rear wheel
and centerstand.
SLINGS
BOLT / WASHER (DISCARD)
SHIPPING
BRACE
PROTECTIVE
COVERING (DISCARD)
