Follow the child seat maker’s
instructions for any additional
advice on adjusting or tightening
the fit.
Lift the head restraint, then route
the tether strap over the seat-back
between the legs of the head
restraint.
Attach the tether strap hook to the
tether anchorage point and tighten
the strap according to the child
seat marker’s instruction. Make
sure the strap is not twisted.
You can also remove the rear head
restraints (see page
). The
removed head restraints should be
secured so they will not be thrown
while you are driving. Make sure to
replace the rear head restraints
when the child seats are not in use.
Push and pull the child seat
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers.
4.
5.
6.
92
Protecting Children
Driver and Passenger Saf ety
44
Flexible type
TETHER STRAP HOOK
ANCHORAGE POINT
０２／０７／０９ １７：０８：５６ ３１Ｓ５Ｐ６２０ ００４７
Main Menu
Table of Contents
▲
▼
