Audio System
Operating the Radio
The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pushing the PWR/
VOL knob.
Adjust the volume by turning the
PWR/VOL knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of four methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN or the
Preset buttons.
TUNE
— Use the TUNE bar to tune
the radio to a desired frequency.
Press the upper part to tune
to a higher frequency, or the lower
part to tune to a lower
frequency. The frequency numbers
will start to change rapidly. Release
the bar when the display reaches the
desired frequency. To change the
frequency in small increments, press
and release the TUNE bar quickly.
SEEK
— The SEEK function
searches the band for a station with
a strong signal. To activate it, push
the SEEK switch up or down, then
release it. Depending on which way
you push the switch, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
Comfort and Convenience Features
Main Menu
Table of Contents
▲
▼
Содержание 1999 Accord Sedan
Страница 113: ...Climate Control System PASSENGER S SIDE VENT Comfort and Convenience Features Main Menu Table of Contents...
Страница 201: ...Required Maintenance Record for Normal and Severe Schedules Maintenance Main Menu Table of Contents...
Страница 287: ...Fuses UNDER HOOD FUSE BOX CONTINUED Taking Care of the Unexpected Main Menu Table of Contents...
Страница 296: ...Specifications 1 DX 2 LX EX 3 4 cylinder models 4 6 cylinder models Technical Information Main Menu Table of Contents...