Replacing a Front Turn
Signal Light Bulb
1. Use a long-handled, #2
Phillips screwdriver to loosen
the turn signal assembly
mounting screw.
2. Remove the light assembly
from the bumper.
3. Remove the burned out bulb's
socket from the light assembly
by turning it counterclockwise.
4. To remove the burned out
bulb from the socket by
pushing the bulb in and turn it
counterclockwise until it
unlocks. Install the new bulb.
5. Push the socket into the light
assembly, and turn it
clockwise until it locks.
6. Test the lights to make sure
the new bulb is working.
7. Put the light assembly into
the bumper. Make sure the
tabs on the back edge of the
light assembly fit into the
bumper slots. Tighten the
mounting screw.
Maintenance
TURN SIGNAL ASSEMBLY
BULB
BULB HOLDER
Содержание 1997 Accord Wagon
Страница 61: ...Heating and Cooling Comfort and Convenience Features...
Страница 184: ...UNDERHOOD FUSE BOX EX Taking Care of the Unexpected...
Страница 185: ...ABS FUSE BOX INTERIOR FUSE BOX Taking Care of the Unexpected...
Страница 191: ...1 LX 2 EX Technical Information...