Lights
5. Put the bulb holder back into
its hole in the lens, and turn it
clockwise until it locks.
6. Turn on the parking lights,
and check that the new bulb is
working.
7. Put the side marker assembly
back into the body. Push on
the front edge until it snaps
into place. Install the
mounting screw, and tighten it
securely.
Replacing Rear Bulbs
1. Open the tailgate, and remove
the taillight assembly cover.
2. Pull the taillight assembly out
of the body.
3. To open the tabs on the
taillight assembly, push in on
the tab and lift it up. (You may
use a flat-tip screwdriver to
gently pry it open.) Remove
the screws under each tab.
Then, slide the taillight
assembly diagonally out.
4. Determine which of the three
bulbs is burned out: tail/
stoplight, back-up light, or
turn signal. Remove that bulb
by turning it one-quarter turn
counterclockwise and pulling
it out of the socket.
5. Install the new bulb in the
socket.
Maintenance
LOCK TABS