Cooling System
6. Mix the recommended
antifreeze with an equal
amount of purified or distilled
water in a clean container. The
cooling system capacity is:
With 5-speed manual
transmission:
0.85 U.S. gal. (0.70 Imp. gal, 3.2 )
With automatic transmission:
0.82 U.S. gal. (0.68 Imp. gal, 3.1 )
7. Pour coolant into the radiator
up to the base of the filler neck.
8. Loosen the bleeder bolt on top
of the engine. Tighten it again
when coolant comes out in a
steady stream with no bubbles.
9. Refill the radiator to the base of
the filler neck. Put the cap on
the radiator, and tighten it only
to the first stop. Start the
engine, and let it run until it
warms up (the radiator cooling
fan comes on at least twice).
10. Turn off the engine. Check the
level in the radiator, and add
coolant if needed. Install the
radiator cap, and tighten it
fully.
11. Fill the reserve tank to the
MAX mark. Install the reserve
tank cap.
Maintenance
RESERVE TANK
BLEEDER BOLT