Child Safety
Using Child Restraints with
Tethers
Your Honda has three attachment
points for tether-style child seats.
Use the dimensions in the above
illustration to locate the attach-
ment point you want to use. Cut a
12.7 mm (1/2 inch) diameter hole in
the rear shelf, then install the
tether hardware that came with
the child seat.
Tighten the bolt to:
22 N.m(2.2 kg-m,16 lb-ft)
If you are not sure how to install
the bracket, have it installed by
your authorized Honda dealer.
If you need an anchor plate and
mounting hardware, you can obtain
them by writing to:
American Honda Motor Co., Inc.
Consumer Affairs
1919 Torrance Blvd.
Torrance, CA 90501-2746
Canadian Cars
The anchor plate and mounting
hardware for a top tether are
supplied with the car. When
installing, make sure the toothed
washer is on the bottom of the bolt.
The supplied anchor plate is
designed only for mounting a child
restraint. Do not use it for any
other purpose.
Driver and Passenger Safety
90 mm (3.5 in)
290 mm
(11.4 in)
TOOTHED WASHER
Table of Contents
Main Menu
▲
▼
