Lights
Replacing a Rear License
Bulb
1. Remove the two screws and
remove the lens.
2. Pull the bulb straight out of its
socket. Push the new bulb in
until it bottoms in the socket.
3. Turn on the parking lights and
check that the new bulb is
working.
4. Reinstall the lens. Reinstall the
two screws and tighten them
securely.
Replacing Interior and Trunk
Light Bulbs
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file
or a small flat-tip screwdriver.
Do not pry on the edge of the
housing around the lens.
Maintenance
INTERIOR LIGHT
Table of Contents
Main Menu
▲
▼