Using Child Restraints With Tethers
Your Honda has three attachment points
for tether-style child seats. Remove the
cover from the desired attachment point,,
then install the tether hardware that
came with the child seat. Tighten the bolt
to:
16 lb.ft (22 N.m,2.2 kg.m)
If you are not sure how to install the bracket, have it installed by your
Honda dealer.
If you need an anchor plate and mounting hardware, you can obtain
them by writing to:
American Honda Motor Co., Inc.
Consumer Affairs
1919 Torrance Blvd.
Torrance, CA 90501-2746
Canadian Cars
The anchor plate and mounting hardware for a top tether are
supplied with the car. When installing, make sure the toothed washer
is on the bottom of the bolt.
The supplied anchor plate is designed only for mounting a child
restraint. Do not use it for any other purpose.
Storing a Child Seat
When you are not using an infant seat or other child restraint, either
remove it or make sure it is properly secured so it cannot be thrown
around the car during a crash.
TOOTHED
WASHER