© 2012 American Honda Motor Co., Inc. – All Rights Reserved.
AII 47348 (1209)
5 of 6
17. Plug the trailer socket harness 10-pin connector into
the vehicle 10-pin connector.
18. Install the connector clip into the vehicle 10-pin
connector, and push the connector clip and trailer
socket harness clip into the holes in the body panel.
832003AE
VEHICLE 10-PIN
CONNECTOR
TRAILER SOCKET
HARNESS 10-PIN
CONNECTOR
CONNECTOR
CLIP
VEHICLE 10-PIN
CONNECTOR
BODY PANEL
CONNECTOR
CLIP
TRAILER SOCKET
HARNESS CLIP
19. Under the hood, remove the subfuse box upper
cover, and install the three 20A fuses and two 7.5A
fuses into the receptables in the subfuse box.
Reinstall the subfuse box upper cover.
20. Check that all wire harnesses are routed properly
and all connectors are plugged in.
21. Reinstall all removed parts. Check that all clips and
fasteners are installed securely.
22. Reconnect the negative cable to the battery.
23. Reset the clock, and reset the radio station presets.
24. Put the subharness kit in the glove box.
832104AE
SUBFUSE BOX
UPPER COVER
7.5A FUSE
7.5A FUSE
20A FUSE
SUBFUSE
BOX
Upper side viewed
20A
FUSE
7.5A FUSE
2 FUSES,
20A
7.5A
FUSE
2 FUSES,
20A
SUBFUSE
BOX
