© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
AII 44367 (1008)
23 of 28
Reinstalling the Left A-Pillar Trim
105. Check that the left A-pillar trim and the left A-pillar
trim pin are not damaged, and install the clip on the
pin.
106. Position the clip perpendicular to the hole in the left
A-pillar. Install the clip by lightly pushing the left
A-pillar trim at the area marked “SIDE CURTAIN
AIRBAG”.
•
Check that the airbag is not pinched by the clip.
•
Do not push the left A-pillar trim excessively.
6305010H
CLIP
VEHICLE
CLIP
Remove.
LEFT
A-PILLAR
TRIM PIN
LEFT
A-PILLAR
6519020Y
CLIP
LEFT
A-PILLAR
CLIP
AREA MARKED
“SIDE CURTAIN AIRBAG”
LEFT A-PILLAR
TRIM
VEHICLE
PANEL
107. Check that all wire harnesses are routed properly
and all connectors are plugged in.
108. Reinstall all removed parts. Check that all clips and
other fasteners are installed securely.
109. Reconnect the negative cable to the battery.
110. Enter the customer’s radio anti-theft code, and reset
the radio station presets.
111. Reset the clock.
112. Perform “REMOTE ENGINE STARTER
REGISTRATION” and “FUNCTION CHECK.”
