12 of 28
AII 44367 (1008)
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
Routing the Engine Starter Harness
37. Route the engine starter harness as shown.
38. Using isopropyl alcohol on a shop towel, thoroughly
clean the areas where the 40A fuse labels and the
3A fuse label will attach.
39. Attach the 40A fuse labels and the 3A fuse labels to
the relay block and the fuse case of the engine
starter harness.
40. Plug the three relays into the relay block of the
engine starter harness.
921304BD
ENGINE STARTER
HARNESS
DRIVER’S LOWER
COVER OPENING
921305BD
RELAY
3A FUSE
LABEL
RELAY
BLOCK
40A FUSE
LABEL
FUSE
CASE
ENGINE STARTER
HARNESS
41. Unlock the vehicle 42-pin connector by pushing the
retaining tab on the connector, and unplugging the
connector from the fuse box.
42. Unplug the vehicle 4-pin connector and the 2-pin
connector from the top of the fuse box as shown.
43. Wrap two urethane tapes around the vehicle 4-pin
connector and the 2-pin connector.
44. Secure the vehicle 4-pin connector and 2-pin
connector to the vehicle harness using a wire tie.
921306AD
VEHICLE
2-PIN
CONNECTOR
VEHICLE
42-PIN
CONNECTOR
FUSE
BOX
RETAINING
TAB
Push.
VEHICLE 4-PIN
CONNECTOR
VEHICLE 2-PIN
CONNECTOR
VEHICLE 4-PIN
CONNECTOR
921307AD
WIRE
TIE
VEHICLE
HARNESS
URETHANE TAPE
VEHICLE
4-PIN AND 2-PIN
CONNECTORS
