© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
AII 37726 (0708)
7 of 12
23. Route the bus cable forward to the right front
console frame along the vehicle harness.
24. Route the bus cable connector to the dashboard
and out through the dash opening.
BUS CABLE
DASH OPENING
VEHICLE
HARNESS
DASH OPENING
25. Measure 300 mm from the end of the bus cable
connector, then secure the bus cable to the
vehicle harness with three wire ties.
WIRE TIES
BUS CABLE
CONNECTOR
300 mm
26. Secure the bus cable to the vehicle harness with
five wire ties.
27. Using isopropyl alcohol on a shop towel, clean the
area where the cushion tape will attach. Attach the
bus cable to the floor panel with the two cushion
tapes in the area shown.
VEHICLE
HARNESS
BUS CABLE
CUSHION
TAPES
WIRE TIES
With the vehicle bracket
•
Using the isopropyl alcohol on a shop towel, clean
the inside of the vehicle bracket where the
cushion tape attaches. Attach the cushion tape on
the vehicle bracket at the location shown.
CUSHION
TAPE
VEHICLE
BRACKET
BUS CABLE
ATTACHING
PLACE
(inside)
