© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
AII 32445 (0605)
21 of 24
82. Position the monitor console on the monitor
bracket, and install two 5 x 16 mm washer-screws
and two 5 x 25 mm washer-screws. Install two
screw caps, then reinstall the left and right lens.
Do not pinch DIN cable “A” between the monitor
console and monitor bracket.
81. While holding the monitor console, secure the
3-pin connector and the terminal to the back of
the monitor console with one cushion tape.
79. Remove the left and right lens from the monitor
console, then install the monitor gasket on the
console while aligning the mark of the monitor
gasket with the mark of the monitor console.
2326290T
MONITOR
GASKET
MARK
RIGHT LENS
MONITOR
CONSOLE
LEFT LENS
80. Remove the tape that secures the 3-pin connector
to the monitor console. Connect the interior light
harness 3-pin connector and DIN cable “A”
terminal into the monitor console 3-pin connector
and monitor console terminal.
4917032H
MONITOR
CONSOLE
MONITOR
CONSOLE 3-PIN
CONNECTOR
MONITOR
CONSOLE
TERMINAL
INTERIOR
LIGHT 3-PIN
CONNECTOR
DIN CABLE “A”
TERMINAL
TAPE
FRONT
MONITOR
CONSOLE
HARNESS
4917052H
MONITOR
CONSOLE
5 x 16 mm
WASHER
SCREW
MONITOR
BRACKET
FRONT
SCREW
CAPS (2)
5 x 25 mm
WASHER
SCREW
RIGHT
LENS
LEFT
LENS
4917041H
3-PIN
CONNECTORS
MONITOR
CONSOLE
TERMINALS
FRONT
CUSHION
TAPE