© 2004 American Honda Motor Co., Inc - All Rights Reserved.
AII 27573 (0410)
7 of 22
If the vehicle is not equipped with a cassette/MP3/
CD player, go to step 18; otherwise, go to step 13.
13. Remove the player panel by removing the two
self-tapping screws and two clips.
15. Remove the left and right audio brackets (two
washer-screws and one self-tapping screw for
each bracket). Separate the player and pocket.
Set the pocket aside; it will not be reused.
16. Slide the clip nut (supplied) onto the display
module flange.
2306141T
CLIP
SELF-TAPPING
SCREW
PLAYER PANEL
14. Remove the player/pocket assembly. Unscrew the
four flange nuts, and pull the assembly out toward
you. Unplug the audio subharness cable
connector.
VEHICLE
CONNECTOR
(without
navigation
system)
VEHICLE CONNECTOR
(with navigation system)
AUDIO
SUBHARNESS
CONNECTOR
(with navigation
system)
AUDIO
SUBHARNESS
CONNECTOR
(without
navigation
system)
LEFT PLAYER
BRACKET
6 mm
FLANGE
NUT
RIGHT
PLAYER
BRACKET
RIGHT PLAYER
SUBBRACKET
PLAYER BASE-
BRACKET
LEFT PLAYER
SUBBRACKET
2N28080M
WASHER-
SCREW
SELF-
TAPPING
SCREW
LEFT AUDIO
BRACKET
PLAYER
(Cassette/MP3/CD)
RIGHT AUDIO
BRACKET
WASHER-
SCREW
POCKET
(Do not reuse.)
SELF-TAPPING
SCREW
PLAYER
(Cassette/MP3/CD)
SELF-TAPPING
SCREWS (2)
(supplied with
XM radio
attachment kit)
RIGHT
PLAYER
BRACKET
WASHER-
SCREW
(supplied
with
Audio
Attachment
kit)
LEFT
PLAYER
BRACKET
BRACKET
HOLE
SCREW
POSITION
DISPLAY
MODULE
SELF-
TAPPING
SCREW
CLIP NUT
DISPLAY
MODULE
POCKET
WASHER-
SCREW
(supplied
with Audio
Attachment
kit)
17. Set the player on the display module pocket.
Position the left and right player brackets on the
display module pocket and player, and reinstall the
four washer-screws. Install the three self-tapping
screws to secure the display module pocket.
