6 of 11
AII 42446 (0908)
© 2009 American Honda Motor Co., Inc. - All Rights Reserved.
17. Remove the two bolts from the bottom of the
center panel.
18. Release the ten retaining clips, and pull the center
panel toward you.
19. Unplug the right vehicle connectors, then remove
the center panel.
Routing the Bus Cable
20. Route the bus cable along the vehicle harness
from the trunk side.
21. Return the right rear seatback, then remove the
clip securing the floor carpet. Turn over the floor
carpet.
22. Route the bus cable connector as shown.
BUS CABLE
RIGHT REAR
SEATBACK
FLOOR CARPET
BUS
CABLE
Route
under the
floor
carpet.
10 CLIPS
BOLTS
