6
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (Continued)
4. Remove the wiring box cover from the fan housing (A).
Wiring box
cover
A
4
5. Pull the house wires through the hole in the wiring box cover.
Using the quick connectors, connect the house wiring from
the wall switch to the fan housing (A). 14 AWG is the smallest
conductor that should be used for branch-circuit wiring. Please
refer to the wiring diagrams on page 4 to ensure proper wire
connections are made.
Carefully push the wire connections into the wiring box housing
and reattach the wiring box cover.
CAUTION:
If your electrical wires do not match the colors
listed, consult a licensed electrician to determine what each
house wire represents before connecting the fan.
Quick
connector
Wiring
box cover
Wiring box
cover
5
6. Connect a 4 in. circular duct to the duct connector on the fan
housing (A), securing it with duct tape or a clamp. Vent the
duct to the outside.
Finish ceiling work. The ceiling hole should be aligned with
the edge of the fan housing (A).
4 in.duct
A
Ceiling
Duct tape
or clamp
6
7. Join the connectors for the LED light from the fan housing (A) to
the grille (B). The grille (B) must be connected before turning
on power to the fan.
7
4
hole
2
hole
A
B
