Assembly Instructions 2/3
STEP 2
Attach Shelves (D)
to unit with Flat Washers,
Spring Washers and
Head Cap Bolts.
STEP 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Figure 1
Figure 2
Place Top (A) upside down on a soft cloth.
Attach Side Frame (B), (C) onto Top (A)
with Head Cap Bolts (short).
(See figure 1)
Attach Stretcher (F) to unit with
Flat Washers, Spring Washers and Head Cap Bolts.
(See figure 2)
B
C
F
A
Head Cap Bolt
(short)
D
D
D
D
Head Cap Bolt
Head Cap Bolt
Spring Washer
Spring Washer
Flat Washer
Flat Washer
