Homestyles Closet Wall Drawer Unit 20 05050 0075, Руководство пользователя

Страница: 8 / 10

Assembly Instructions 8/9
Hardware List
STEP 11
Drill a 3/8” hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at back of unit with Machine Screw.
Move unit back into place.
If assembling multiple Closet Wall Units
together, go to and complete Step 12 now,
then return to and complete Step 11.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 9)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
Figure 9
Machine Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Drill 3/8” hole in wall
Back of unit
IMPORTANT
Ÿ
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
M4x10
Machine Screw
1 pc. (+1 extra)