Assembly Instructions 2/9
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Side (B) to Back Frame (A) with Tapered Bolts (long),
. (See Figure 1)
tightening bolts only halfway
Attach Rails (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers,
. (See Figure 2)
tightening bolts only halfway
A
B
D
D
Figure 1
Figure 2
Tapered Bolt (long)
Flat Washer
Spring Washer
Head Cap Bolt
