IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Assembly Instructions 2/6
Cam Lock Screw
Magnet
Magnet
Wood Screw for Magnet
Attach Back Panel (F) to Back Panel (G) as shown.
Attach 2X Magnets to
Back Panel (F) and (G) by using
Wood Screws in the pre-drilled holes
(See figure 1).
Insert Cam Lock Screws into
the pre-drilled holes of
Back Panel
(F) and (G).
Insert Cam Lock Screws into the
pre-drilled holes of Front Frame(H),
Plinth (D) and (E).
Figure 1
STEP 2
STEP 3
Attach Plinth (D) and (E)
to Base (C) with Cam Locks.
(See figure 2)
Figure 2
Cam Lock Screw
Cam Lock
F
G
E
D
H
E
D
C
