Assembly Instructions 3/3
STEP 2
Orientate Top Rail (C) so the ‘Arrow’ sticker is at back of unit,
then attach Top Rail (C) and a Back Rail (E) to unit with Bolt (long)
Small Flat Washer and Nut Cap. (See Figure 4)
Attach other Back Rail (E) to unit with Bolt (long), Bolt (short),
Small Flat Washers and Nut Caps. (See Figure 5)
C
E
E
Bolt (long)
E
E
Nut Cap
Small
Flat Washer
Bolt (short)
Nut Cap
Small Flat Washer
Bolt
Nut Cap
Small Flat Washer
Bolt (short)
Bolt (short)
STEP 3
Attach Back Rails (E) to back leg and seat
with Bolts, Bolts (short), Small Washers and
Nut Caps, bending Back Rails slightly to align
the holes in the Back Rails to the holes in the
back leg and seat. (See Figures 6 and 7)
Tighten all bolts and nut caps used in Steps 2 and 3.
STEP 4
To level the unit, adjust the adjustable levelers on the bottom of the legs. (See Figure 8)
Note: Unit must be level to work properly.
‘Arrow’ sticker
at back
Figure 4
Figure 5
Bend Back Rail (E)
here.
Figure 6
Figure 7
Figure 8
