Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench and Key Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Front Leg (B) to Seat (A) with Flat Washers, Spring Washers, Head Cap Bolts and Flat Head
Bolt,
tightening the bolts only half way. (See Figures 1 and 2)
Attach Side Rails (D) to unit with Flat Head Bolts,
tightening the bolts only half way.
(See Figures 2 and 3)
tightening the bolts only half way.
Attach Back Leg (F) to unit with Flat Head Bolts,
Tighten all bolts on this step.
Figure 2
Figure 3
Figure 1
A
D
D
B
F
Spring Washer
Flat Washer
Head Cap Bolt
Flat Head Bolt
Flat Head Bolt
