Assembly Instructions 2/10
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws into pre-drilled hole in Top (A),
Side Panels (C), (D), Middle Panel (E), Plinths (K) and
Back Upright (N), then tighten. (See Figure 1)
A
C
D
N
E
K
K
Figure 1
Cam Lock Screw
