Assembly Instructions 7/7
STEP 10
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall holes
and attach Brackets with Wall Screws.
Attach Brackets at pre-drilled holes
at top of unit with Wood Screws.
Move unit back into place.
Slide Tipover Restraints through
Brackets on wall and Brackets on unit.
(See Figure 8)
Put tie end of Tipover Restraints into lock
end of Tipover Restraints and pull until tight.
Anchor
2 pcs. (+1 extra)
Bracket
4 pcs. (+1 extra)
Tipover Restraint
2 pcs. (+1 extra)
M3.5x40
Wall Screw
2 pcs. (+1 extra)
M3.5x16
Wood Screw
2 pcs. (+1 extra)
Drill 3/8” hole in wall
Top of unit
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Figure 8
Wood Screw
Wall Screw
Pre-drilled hole
at top of unit
Hardware List
