Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screw into pre-drilled hole in Front Frame (D). (See Figure 1)
Attach Divider (E) to Front Frame (D) with Cam Lock. (See Figure 2)
Attach Back Panel (F) to unit with Head Cap Bolt. (See Figure 3)
Figure 1
Figure 2
Figure 3
D
E
F
Cam Lock
Head Cap Bolt
Cam Lock Screw
