Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Mirror (A) face down on a soft cloth.
Attach Mirror Support (B) to Mirror (A) in horizontal or vertical position
with Head Cap Bolts, Spring Washers and Flat Washers.
Tighten bolts with Hex Wrench. (See Figure 1)
VERTICAL
HORIZONTAL
Flat Washer
A
B
Figure 1
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
B
A
B
B
