Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Side Panels (B), (C) and
Bottom (G), then tighten.
(See Figure 1)
B
C
G
A
STEP 2
Attach Back Rail (I) to Side Panel (B)
with Cam Lock. (See Figure 2)
Slide Back Panel (H) into Side Panel (B)
and Back Rail (I).
Attach Back Rail (J) to unit with Cam Lock
and slide Back Panel (F) into place.
Attach Back Rail (I) to unit with
Cam Lock.
F
B
J
H
I
I
Figure 1
Figure 2
Cam Lock Screw
Cam Lock
Cam Lock Screw
Cam Lock Screw
Cam Lock Screw
