12/19
ALFA IN a.s.
©
www.alfain.eu
Checking the oil level
daily or before every start
Check air filter
1
daily or before every start
Control of air sampling openings and cooling surfaces
1
daily or before every start
Cleaning foam air filter
Every 3 months
or 50 hours.
Changing the oil
First: month or 20 hours of
operation.
After that: every 6 months
or 100 hours of operation.
Check the wear of the spark plugs and cable
every 100 hours of
operation
General inspection of equipment
2
every year or every 300
hours of operation
1
Periods shorten up to ½ when the equipment is operated in extremely dusty
or dirty environments
2
Let make an authorized service partner
Check oil level / top up oil
Oil
10W 40 (-
18°C - 50°C), 5W 40(-40°C - 0°C)
1. Make sure, that the device has not running, the starter position is
OFF, it is in a horizontal position and is chilly, allow the oil to drain into
the oil pan.
2. Clean the area around the oil cap throat to prevent possible oil
contamination when opening the oil cap throat.
3. Remove the oil cap stopper
4. The oil level should be up to the upper edge of the throat, but it would
not leak.
5. In the event that the oil level does not reach the upper edge of the
throat. Top up oil (by oil throat) so that the oil level reached to the
upper edge of the throat.
Checking maintenance and replacement of the air filter and air
system
Daily or before starting, check the air filter. Check the dirt and debris around
the air cleaner. Keep this area clean. Also check for loose or damaged.
Replace all bent or damaged air cleaner components.
NOTE:
Operating the engine with loose or damaged air cleaner components
could allow unfiltered air into the engine causing premature wear or damage.
