Step 10
Set front wall, repeating steps
taken on back wall. Remove
temporary strip at door, only
after end-wall installation is
complete.
Note: Door can be lifted off
hinges if desired.
Need help? call 717-768-0804 page 3
Step 8
Set end-wall in place and nail
from the outside through the sid-
ing, making sure that the bottom
plate on the wall is tight against
the floor. The back wall should
fit in the 3 1/2” space between
left wall and floor.
Step 9
Using 3” nails, nail the corner
together every 12” through sid-
ing or through the inside as
pictured. Then nail through
topplate of end wall, down
through 2x4 on side-wall.
Step 11
Repeat steps 7, 8, and 9 to
install right side wall.
© HomePlace Structures