HomeMatic HmIPW-DRBL4, Инструкция по установке и эксплуатации, Страница: 53 / 59

53
Operation
After switching on the blind actuator, the blinds/
shutters/awnings are in an unknown position.
The current height and slats position of a channel
until reaching a limit switch cannot be displayed.
During this time, the current moving direction will
be displayed:
Symbol Meaning
Move down
Moved up
Stop
Select button
After selecting a channel via the channel button (see
Channel button), you can select the channel condition
by briefly pressing the select button (
see figure 7 ) (move
down - stop - move up - stop etc.). On each button
press, you can switch to the next condition.
If you have not selected a channel, you can select the
following options in the LC display by pressing the Select
button briefly:
• bus supply voltage (in V)
• temperature in blind actuator (in °C)
• empty display