HomeMatic HmIPW-DRBL4, Инструкция по установке и эксплуатации, Страница: 47 / 59

47
Start-up
After installation and before connecting the device
to the app, simple operating functions (e.g. for test
purposes) are available directly on the device (see
„6 Operation“ on page 52).
5.4 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First, set up your Homematic IP Wired Access
Point to enable operation of other Homematic IP
Wired devices within your system. For further in-
formation, please refer to the operating manual
of the Wired Access Point.
To integrate the blind actuator into your system and en-
able it to communicate with other Homematic IP Wired
devices, you must teach it in first.
You can connect the blind actuator to the Central Con-
trol Unit CCU3 for local configuration via PC.
As an alternative, connect the device to the Homematic IP
cloud for flexible control via smartphone app.
You can
• control the wired system via smartphone app
using the Homematic IP Wired Access Point
(HmIPW-DRAP) or
• combine wired devices with wireless