37
Start-up
5.2.2 Teaching-in to a Homematic Central Control Unit
Your device can be conveniently
•
controlled and configured (directly via the CCU2 user in
-
terface or an app)
•
connected directly to other devices or
•
used in Central Control Unit programs
by using the Homematic software “WebUI”. Therefore, your
siren has to be taught-in to the Homematic Central Con-
trol Unit first. New devices are taught-in to the CCU2 via the
Homematic “WebUI”.
As soon as a device has been taught-in to a Central
Control Unit, it can only be connected to other compo-
nents via this unit.
Each device can only be taught-in to one Central
Control Unit.
During teach-in, please make sure you maintain a
distance of at least 50 cm between the Homematic
devices and the Central Control Unit.
To teach-in your device to the Central Control Unit, proceed
as follows:
•
Open the “WebUI” user interface in your browser. Click
the “Teach-in devices” button on the right-hand side of
the screen.
