35
Start-up
it to communicate with other Homematic devices, you must
teach it in first. You can teach-in the siren directly to other
Homematic devices or to the Homematic Central Control Unit.
During teach-in please note that the siren has 4 different chan-
nels with pre-defined functionalities. You can teach-in corre
-
sponding remote controls (e.g. Homematic Remote Control 4
buttons for alarm functions) or sensors (e.g. Homematic Wire-
less Door/Window Sensor, optical).
The 4 channels offer the following functions. This is why the
sensors and remote controls have to be taught-in to the appli-
cable channels of the siren.
•
Channel 1 can be used to teach-in sensors that monitor
the exterior of a building (e.g. windows and doors).
•
Channel 2 can be used to teach-in sensors that monitor
the interior of a building (e.g. room doors and motion de-
tectors).
•
Channel 3 can be used to teach-in panic alarm transmit-
ters (e.g. remote controls) that are supposed to trigger an
alarm at any time, independent from the protection mode.
•
Channel 4 can be used to teach-in remote controls or
transmitters that are used for activating and deactivating
the alarm mode of the siren.
5.2.1 Teaching-in directly to Homematic devices
If you would like to teach-in the siren to one or more
Homematic devices, you must put the devices into teach-in
mode. To do this, proceed as follows:
