32
Push the window handle onto the window rotary
handle sensor and install the handle on the window
again. In this case, the window handle must be positi-
oned horizontally!
Now, insert the fastening screws of the handle again
and tighten the screws.
Tighten the screws until a slight amount of
pressure is evident. The excenter in the win-
dow rotary handle sensor is not to be squashed
to the point that it no longer follows the turning
motion of the handle shaft.
Normally, the screws of the window handle are
long enough. If this is not the case, use the
screws provided. If these do not reach either,
purchase screws that are 5 mm longer than
the original screws from a specialized shop.
If the handle shaft not longer reaches into the
window mechanics (window mechanics will not
move when the handle is actuated), the shaft
can be extended slightly on most handles.
