31
ed switch/contact is pressed, the device LED simply
lights up red for 2 seconds to indicate an error. Direct
teach-in is no longer possible.
7.3 Configuration mode (also with central
control unit/configuration tool)
Briefly pressing the teach-in button (A) switches the
shutter contact interface to configuration mode.
When no central control unit is being used, briefly
pressing the button again enables you to activate
teach-in mode. This is not possible during operation
with a central control unit (see also Section 7.2).
Using a central control unit or configuration tool
opens up additional configuration options. To initiate
configuration using one of these components, the
shutter contact interface must be manually switched
to configuration mode by briefly pressing the teach-
in button (A). The device LED flashes green to indi-
cate that configuration mode has been activated.