54
Operation
of the channel buttons during teach-in.
• Briefly press the Config button (
B
) of the remote
control using a pointed object (e.g. a pen) in order to
activate the 20 second teach-in mode. Depending on
the rocker adapter, you can reach it either through
the rocker or diagonally from above. The device LED
flashes green.
•
Press the rocker adapter shortly to activate teach-in
mode for direct teaching-in.
• A continuous orange flashing of the device LED
indicates that teach-in mode is active. (To exit
configuration mode, briefly press the Config button
again.)
•
Now put the device you want to teach-in to the
remote control into teach-in mode by following the
relevant operating manual instructions.
•
As soon as both devices have completed the teach-
in procedure, the LEDs go off and the taught-in
device can be operated via the remote control.
If no teach-in operations are carried out,
teach-in mode is exited automatically after 20
seconds.
If other devices are also in teach-in mode, they
will be taught-in.
