HomeMatic HM-LC-Sw1-DR, Инструкция по установке и эксплуатации, Страница: 59 / 76

59
Start-up
your switch actuator to teach-in as well. Therefore,
press and hold the device button
(A) for at least 4
seconds. The device LED (B)
will flash slowly to
indicate that teach-in mode is active.
> 4 s
• After the teach-in mode has expired (60s), the
newly taught-in device will appear in the inbox of
your software interface. The button "Inbox (x new
devices)" indicates how many new devices have
been taught-in successfully.
• If required, you can teach-in additional devices
by repeating the steps described above for each
device.
•
Now configure the newly taught-in devices in the
inbox as described in section „Configuring newly
taught-in devices“.